[chef] Re: Re: Re: Registering chef client with a server

[Warren Bain < >]

Check out the 'knife bootstrap' command from your workstation which will 
remotely install chef and place the appropriate validator.pem and knife.rb 
config onto the node. It will then register itself with the chef server.

Wazza


Warren Bain
http://ninefold.com
Australia's cloud
direct: +61 2 8221 7729
mobile: +61 414 867 559
follow: http://twitter.com/thoughtcroft

Dimitar Georgievski 
<
 >
 wrote:
I've seen that blog before and I think it describes only the Chef server and 
workstation set-up. The link to the Wiki site for the workstation set-up
 http://wiki.opscode.com/display/chef/Workstation+Setup

mentions the following procedure to set-up the workstation when using OS Chef 
server:
$ knife configure -i
Please enter the chef server URL: [http://mychef.example.com:4000] ;
http://mychef.example.com<http://mychef.example.com>
Please enter a name for the new user: [root] chadmin
Please enter the existing admin name: [admin]
Please enter the location of the existing admin's private key: 
[/etc/chef/admin.pem] /etc/chef-server/admin.pem
Please enter the validation clientname: [chef-validator]
Please enter the location of the validation key: [/etc/chef/validation.pem] 
/etc/chef-server/chef-validator.pem
Please enter the path to a chef repository (or leave blank):
Creating initial API user...
Please enter a password for the new user:
ERROR: Chef::Exceptions::ValidationFailed: Option admin must be a kind of 
[TrueClass, FalseClass]!  You passed "https://mychef.example.com/users/admin";.

Instead creating the required knife files from the command line I tried to 
create the new admin account from the Web interface of the chef server. The 
private key generated by this step was stored in the .chef/chadmin.pem on the 
workstation.

I've also copied to this location on the workstation the chef-validator.pem 
from the Chef server.
And this seemed to work, because I was able to query with the knife tool the 
Chef server from the workstation.

My problem started when I tried to register clients ie nodes that should be 
managed by the server.

How do I register the client? I created the client.rb with info on how to 
connect to the server and which client-name to use for validation with the 
server.

So, when I started chef-client I expected the client would self register and 
create the client.pam file. But that's not the case and I get various errors 
at start-up.

The question is can I register the clients from the command line or they have 
to be manually added through the Web GUI?

Many thanks for the prompt response.

Dimitar

On Wed, Feb 27, 2013 at 3:54 PM, Devdatto Ray 
<
 <mailto:
 >>
 wrote:
Please try this blog - 
http://www.linuxguy.in/how-to-install-and-configure-open-source-chef-server-11/

This one has the correct and updated instructions which I followed and was 
able to configure Open Source Chef Server and Client using v11.x on RHEL 5.7.

The hostnames are entered differently with https and no ref to port in v11.x

Thanks and Regards
Devdatto


On Wed, Feb 27, 2013 at 2:48 PM, Dimitar Georgievski 
<
 <mailto:
 >>
 wrote:
Hello,

I am trying unsuccessfully to register/configure a chef client with Open 
Source chef server. It should be simple but I find the available 
documentation outdated or to be missing important information.  It looks like 
it is focused on the hosted chef only. I am stuck on this step which I 
thought would be the simplest part of the installation and configuration.

Could someone share his/her experience with setting up an Open Source server 
and clients? Is there are a guide or tutorial on it? Maybe I missed it.

I am using ver 11.4.0 for both client and server on RHEL 5..6.

Thanks,

Dimitar