[chef] Re: Re: openssh-cookbook - extending sshd_config?


Chronological Thread 
  • From: Alexander Skwar < >
  • To:
  • Subject: [chef] Re: Re: openssh-cookbook - extending sshd_config?
  • Date: Fri, 4 Sep 2015 16:45:23 +0200

Hi Fabien

Seems, that I don't quite get, how to use this cookbook. Pretty complicated…

I'd like to have a cookbook/recipe or role named "hardened". There, I'd like to set values, which makes a system "hardened". I already have a "hardening" cookbook, which does other things (or, actually, also does SSHd tweaking, but not yet with the openssh cookbook).

And I have another cookbook/recipe or role called "normal", with "normal" values.

For example, in the "hardened" "situation", I'd like to have

  PermitRootLogin no

while in the "normal" settings, there should be

  PermitRootLogin without-password

(Just to cherry pick one sshd_config setting - there are also other differences).

To invoke chef-solo, I execute:

  /usr/bin/chef-solo -c /opt/kitchen.simpel/solo.rb -j /opt/kitchen.simpel/nodes/mgmt01-test.json -E t1 -l debug


It works somewhat well so far, but I don't see how I can easily override attributes from within a cookbook. As it is right now, I've added this to a new *role" in my nodes  file (→ https://bitbucket.org/alexs77/chef-with-openssh/src/fbdcea9768db40ab120f59ad3fc4d15ae8080877/opt/kitchen.simpel/nodes/mgmt01-test.json?at=master). And in my roles files (→ https://bitbucket.org/alexs77/chef-with-openssh/src/fbdcea9768db40ab120f59ad3fc4d15ae8080877/opt/kitchen.simpel/roles/mgmt.json?at=master) I set default values (in mgmt.json), which I partly override in "hardened.json".

That's not quite what I'd want, as I have to make changes in a role file as well (or have to remember to include it).

Could somebody please try to help again? :)

Thanks a lot,
Alexander


2015-09-02 17:30 GMT+02:00 Fabien Delpierre < " target="_blank"> >:
Alexander,

The openssh cookbook is designed to accept any setting you add to your Chef attributes. Most have presets if you look at the attributes/default.rb file of the cookbook: https://github.com/opscode-cookbooks/openssh/blob/master/attributes/default.rb -- however most are commented. The sshd service itself has many defaults.

Because Chef will manage the entire sshd_config file, you cannot simply extend the config, like you asked; Chef will overwrite everything because it just does a diff between the existing state and the desired state, so anything that's not in the desired state will be removed. The cookbook and sshd itself have sane presets but if you have an existing, tweaked config, it's easy to lock yourself out of a node.
So the first thing you'll want to do is study your existing config and compare it to the presets to correct any discrepancies.

There are many ways of going about what you're asking. A typical solution is to use a wrapper cookbook with a one-line recipe that simply reads:
include_recipe 'openssh::default'
Add all the openssh attributes you want in that wrapper cookbook's attributes/default.rb, exactly as you see them formatted in the GitHub link above, but change the settings you want, as needed. You can then add that cookbook to your node's run list, and the next chef-client run will apply those settings.
You could also use environments or roles to achieve the same result, but some people will argue that you should just use cookbooks for everything because they're versioned, which makes it easier to roll back if you mess something up.

At this point you might call your cookbook of universal sshd settings an environment cookbook and apply it to all nodes early on in the run list. If you need additional settings applied only to certain nodes, such as a Match Group block, again there are many ways of doing that. You could add t

This is how I do it:
1. I have a common set of sshd settings for all my nodes contained in a role file. I just add that role to all the nodes. This is what that role file looks like: http://pastebin.com/GCUFL9Jd
2. I have separate roles for subsets of nodes, here's just one example: http://pastebin.com/NxUkAEUy -- as you can see it adds a couple of other things to the nodes' run list, you certainly don't need that.
All of the above can be accomplished exclusively with cookbooks, and again, some would suggest that you do it with cookbooks rather than roles or environments, since cookbooks are versioned. Read this about that: http://realityforge.org/code/2012/11/19/role-cookbooks-and-wrapper-cookbooks.html
http://blog.vialstudios.com/the-environment-cookbook-pattern/ is good reading, too.

On Wed, Sep 2, 2015 at 10:58 AM, Alexander Skwar < " target="_blank"> > wrote:
​Hello Matt

Yes, I understand, that it is much more "Chef'fy" to put a COMPLETE configuration file under Chef. But sometimes, that's not really doable.

As FileEdit doesn't support my request, I worked around that and am not using it for this task ;)

Reg. openssh cookbook. Cool!

We'd have a "generic" sshd_config for all hosts. Could I use this cookbook to *extend* or change an existing sshd_config? For example, I'd like to have

   PermitRootLogin without-password


But for certain hosts (or in certain other cookbooks or so), I'd like to have

   PermitRootLogin no
 

Also, for some systems, I'd like to extend the sshd_config with a "Match group" block (to allow or deny certain groups).

Could I use the openssh-cookbook for this? Could you show me how?

Thanks a lot,
Alexander


​​


2015-09-02 15:55 GMT+02:00 Matthew Moretti < " target="_blank"> >:

Hello Alexander,

The general advice I’ve seen about using Chef to edit configuration files is that you should generally avoid doing so if you can. If you have the option of having Chef be the only entity that manages the file in question, it’s much easier to put Chef in charge of the entire file and use a file or template resource instead.

In the case of ssshd_config, I’ve never had a complaint about the openssh cookbook which uses attributes to build the whole config (nice for wrapper cookbooks, environments, roles, etc.).

To answer your actual question though, it doesn’t look like FileEdit will append to the beginning of a file, no. If that’s definitely what you want to do, you’ll probably have to break out some ruby_blocks and use the slightly lower-level ::File methods.

Hope that helps.

Matt Moretti

On Thu, Aug 27, 2015 at 11:14 AM, Alexander Skwar " target="_blank"> wrote:

Hello

With Chef 11.8.2 and FileEdit and the help of this list :), I've now
got a way to replace text in a file and use the captured text. As it
turned out, I'm not using the captured text at all… Oh, well :)

I am now replacing all old values in a config file (sshd_config, to be
exact). And when a certain config setting wasn't there at all, I
insert a line with the new setting. But it will get appended to the
file; it will be at the end of the file.

That's (maybe…) a problem, as a sshd_config file might have a "Match
…" block at the end.

Is there maybe an easy to way to add text to the BEGINNING of the file? :)

Here (or, for maybe better readability on
http://pastebin.com/1QWfsnFZ) is, what I've got now:

#############################################
# SSH Parameter
{"Protocol" => "2", "LogLevel" => "INFO", "MaxAuthTries" => "4",
"IgnoreRhosts" => "yes", "HostbasedAuthentication" => "no",
"PermitRootLogin" => "no", "PermitEmptyPasswords" => "no", "Banner" =>
"/etc/issue.net"}.each do |param, value|
    cfg_file = "/etc/ssh/sshd_config"

    replace_line_re = /^#{param}.*/
    insert_line_text = replace_line_text = "#{param} #{value}"
    insert_line_re = /^#{replace_line_text}/

    ruby_block "CIS: SSHd Parameter modifizieren. " + param + " => " + value do
        block do
            fe = Chef::Util::FileEdit.new(cfg_file)

            # Alte Werte durch neue Werte ersetzen
            fe.search_file_replace_line(replace_line_re, replace_line_text)

            # Zeile mit neuem Wert am Ende der Datei einfügen - falls
nicht schon vorhanden
            fe.insert_line_if_no_match(insert_line_re, insert_line_text)

            # Datei schreiben
            fe.write_file
        end # of block do
        notifies :reload, "service[ssh]", :delayed
    end # of ruby_block "CIS: SSHd Parameter modifizieren. " + param +
" => " + value do
end # of {"Protocol" => "2", "LogLevel" => "INFO", "MaxAuthTries" =>
"4", "IgnoreRhosts" => "yes", "HostbasedAuthentication" => "no",
"PermitRootLogin" => "no", "PermitEmptyPasswords" => "no", "Banner" =>
"/etc/issue.net"}.each do |param, value|




Thanks so much again,


Alexander
--
=>        Google+ => http://plus.skwar.me         <==
=> Chat (Jabber/Google Talk) => " target="_blank"> <==




--

Alexander --  =>        Google+ => http://plus.skwar.me         <== => Chat (Jabber/Google Talk) =>  " target="_blank">  <==





--

Alexander --  =>        Google+ => http://plus.skwar.me         <== => Chat (Jabber/Google Talk) =>  " target="_blank">  <==




Archive powered by MHonArc 2.6.16.

§