James, ruby from rhel6 is working perfectly. I've upgraded about 10
instances with chef and 1 week everything is ok, I suppose we solved
the problem. Big thanks for you!
2011/8/15 James < "> >:
--> Titov,
> Which version of ruby did you try? I built a new version over the weekend
> which I'm more hopeful about, it's essentially a backport of the one in
> rhel6-updates, and a few of the patches are different.
> I posted on the list over the weekend the instructions to test.
> I really appreciate your help, as I'm still not able to reproduce,
> James
>
> 2011/8/15 Titov Alexander < "> >
>>
>> Iso from Centos, I tried to disable prelink and it didn't help.
>>
>> On 11 August 2011 10:52, James < "> > wrote:
>> > Titov,
>> > Thanks a lot for all of the data, it gives me at least a few leads. Can
>> > you
>> > read the link John posted (http://www.ruby-forum.com/topic/205897) and
>> > test
>> > this please? Also, is the iso you're using from CentOS or third party?
>> > James
>> >
>> > On Wed, Aug 10, 2011 at 11:23 PM, Titov Alexander < "> >
>> > wrote:
>> >>
>> >> Hi, James,
>> >>
>> >> Thank you for this great idea.
>> >>
>> >> I experimented with different builds for chef 0.10:
>> >>
>> >> ruby version [ie, 1.8.7-334]
>> >> ruby install type [package]
>> >> ruby source [own, based on rbel]
>> >> CentOS version [5.5]
>> >> CentOS source [iso]
>> >> Is prelink enabled? [1]
>> >> What resource bombed? Our own resource for zabbix managing
>> >> Does the error ever occur on the first run? No
>> >> When does the first error tend to occur? It isn't predictable, chef
>> >> can work two hours or two days
>> >> After the error occurs, do future runs work? Yes, with segfault after
>> >> some time
>> >>
>> >> Chef segfault message:
>> >>
>> >>
>> >> /usr/lib/ruby/gems/1.8/gems/chef-0.10.2/bin/../lib/chef/shell_out/unix.rb:212:
>> >> [BUG] Segmentation fault
>> >> ruby 1.8.7 (2011-02-18 patchlevel 334) [x86_64-linux]
>> >>
>> >> ruby version [1.8.7-334]
>> >> ruby install type [package]
>> >> ruby source [own, based on rbel]
>> >> CentOS version [5.5]
>> >> CentOS source [iso]
>> >> Is prelink enabled? [1]
>> >> What resource bombed? Our own resource for sysctl managing
>> >> Does the error ever occur on the first run? No
>> >> When does the first error tend to occur? It isn't predictable, chef
>> >> can work two hours or two days
>> >> After the error occurs, do future runs work? Yes, with segfault after
>> >> some time
>> >>
>> >> Chef segfault message:
>> >>
>> >>
>> >> /usr/lib/ruby/gems/1.8/gems/chef-0.10.2/bin/../lib/chef/shell_out/unix.rb:22:
>> >> [BUG] Segmentation fault
>> >> ruby 1.8.7 (2011-02-18 patchlevel 334) [x86_64-linux]
>> >>
>> >> ruby version [ree-1.8.7-2011.03]
>> >> ruby install type [package]
>> >> ruby source [own, with standart install script, installed to /opt]
>> >> CentOS version [5.5]
>> >> CentOS source [iso]
>> >> Is prelink enabled? [1]
>> >> Everything works fine. It was tested about a week.
>> >>
>> >> ruby version [ree-1.8.7-2011.03]
>> >> ruby install type [package]
>> >> ruby source [own, based on rbel specs, replace system ruby]
>> >> CentOS version [5.5]
>> >> CentOS source [iso]
>> >> Is prelink enabled? [1]
>> >> What resource bombed? resource yum
>> >> Does the error ever occur on the first run? Yes
>> >> When does the first error tend to occur?
>> >> After the error occurs, do future runs work? Yes
>> >>
>> >> Chef segfault message:
>> >>
>> >>
>> >> /usr/lib/ruby/gems/1.8/gems/chef-0.10.0/bin/../lib/chef/provider/package/yum.rb:555:
>> >> [BUG] Segmentation fault
>> >> ruby 1.8.7 (2011-02-18 patchlevel 334) [x86_64-linux], MBARI 0x6770,
>> >> Ruby Enterprise Edition 2011.03
>> >>
>> >> ruby version [1.8.7-352]
>> >> ruby install type [package]
>> >> ruby source [own, based on rbel]
>> >> CentOS version [5.5]
>> >> CentOS source [iso]
>> >> Is prelink enabled? [1]
>> >> What resource bombed? service resource
>> >> Does the error ever occur on the first run? No
>> >> When does the first error tend to occur? It isn't predictable, chef
>> >> can work two hours or two days
>> >> After the error occurs, do future runs work? Yes, with segfault after
>> >> some time
>> >>
>> >> Chef segfault message:
>> >>
>> >>
>> >> /usr/lib/ruby/gems/1.8/gems/chef-0.10.0/bin/../lib/chef/mixin/command/unix.rb:190:
>> >> [BUG] Segmentation fault
>> >> ruby 1.8.7 (2011-06-30 patchlevel 352) [x86_64-linux]
>> >>
>> >> ruby version [1.8.7-352]
>> >> ruby install type [package]
>> >> ruby source [aegisco]
>> >> CentOS version [5.5]
>> >> CentOS source [iso]
>> >> Is prelink enabled? [1]
>> >> What resource bombed? On start phase - Sending HTTP Request via GET to
>> >> api.opscode.com:443/organizations/****/search/node
>> >> Does the error ever occur on the first run? No
>> >> When does the first error tend to occur? It isn't predictable, chef
>> >> can work two hours or two days
>> >> After the error occurs, do future runs work? Yes, with segfault after
>> >> some time
>> >>
>> >> Chef segfault message:
>> >> /usr/lib/ruby/1.8/net/protocol.rb:135: [BUG] Segmentation fault
>> >> ruby 1.8.7 (2011-06-30 patchlevel 352) [x86_64-linux]
>> >>
>> >> I suppose this information can help somebody to explain problems.
>> >> Seems that it's a number of causes of crash to different builds.
>> >>
>> >> On 11 August 2011 00:07, James < "> > wrote:
>> >> > That last question was phrased awkwardly, let's expand to three:
>> >> > ruby version [ie, 1.8.7-352]
>> >> > ruby install type [ie, package, source]
>> >> > ruby source [ie, ruby,org, aegisco, rbel]
>> >> > CentOS version [ie, 5.5, 5.6]
>> >> > CentOS source [ie, AMI, iso, veewee]
>> >> > Is prelink enabled? [1]
>> >> > What resource bombed?
>> >> > Does the error ever occur on the first run?
>> >> > When does the first error tend to occur?
>> >> > After the error occurs, do future runs work?
>> >> >
>> >> > On Wed, Aug 10, 2011 at 12:45 PM, James < "> > wrote:
>> >> >>
>> >> >> Thanks very much for this, I don't know if I would have found it...
>> >> >> I have to say that I'm confounded; we need more information. I'm not
>> >> >> able
>> >> >> to reproduce these problems on the public CentOS AMI's I have used
>> >> >> for
>> >> >> testing, and I don't have CentOS systems in production. I believe
>> >> >> the
>> >> >> most
>> >> >> important information we need is:
>> >> >> ruby version [ie, 1.8.7-352]
>> >> >> ruby install type [ie, package, source]
>> >> >> ruby source [ie, ruby,org, aegisco, rbel]
>> >> >> CentOS version [ie, 5.5, 5.6]
>> >> >> CentOS source [ie, AMI, iso, veewee]
>> >> >> Is prelink enabled? [1]
>> >> >> What resource bombed?
>> >> >> Does the error never occur on the first run, but does occur after
>> >> >> the
>> >> >> first, intermittently?
>> >> >> It would also be ideal to get traces for these segfaults.
>> >> >> James
>> >> >> [1] http://www.ruby-forum.com/topic/205897
>> >> >> On Wed, Aug 10, 2011 at 12:14 PM, John E. Vincent (lusis)
>> >> >> <lusis.org+ "> > wrote:
>> >> >>>
>> >> >>> There's a bug on RHEL5 with prelinking. I think it was x86_64 only
>> >> >>> but
>> >> >>> I'm not positive at this point.
>> >> >>>
>> >> >>> I had an RPM of 1.9.2 I build monolithically and packaged with fpm.
>> >> >>> It
>> >> >>> install in the system path (we explicitly didn't install RHEL ruby
>> >> >>> at
>> >> >>> all)
>> >> >>>
>> >> >>> Every morning at 4AM all our ruby-based cronjobs and chef itself
>> >> >>> would
>> >> >>> stop working. Prelink was the only cronjob of importance that ran
>> >> >>> at
>> >> >>> that time so a bit of googling lead to this (iirc)
>> >> >>>
>> >> >>> http://www.tsheffler.com/blog/?p=491
>> >> >>>
>> >> >>> I opted to just remove prelink from the system since this isn't the
>> >> >>> first time I've seen it cause issues. In your case, you'd probably
>> >> >>> add
>> >> >>> the exclusion as part of the RPM.
>> >> >>>
>> >> >>> It's easy enough to test, uninstall/disable the prelink cron job
>> >> >>> and
>> >> >>> see if it still happens.
>> >> >>>
>> >> >>> On Wed, Aug 10, 2011 at 2:44 PM, James < "> > wrote:
>> >> >>> > John,
>> >> >>> > Please elaborate?
>> >> >>> > Thanks,
>> >> >>> > James
>> >> >>> > On Wed, Aug 10, 2011 at 5:07 AM, John E. Vincent (lusis)
>> >> >>> > <lusis.org+ "> > wrote:
>> >> >>> >>
>> >> >>> >> After a day? Sounds like the prelinking bug.
>> >> >>> >>
>> >> >>> >> On Aug 10, 2011 6:04 AM, "Titov Alexander" < "> >
>> >> >>> >> wrote:
>> >> >>> >> > Hi James,
>> >> >>> >> >
>> >> >>> >> > Problem is still persist:
>> >> >>> >> >
>> >> >>> >> > [Tue, 09 Aug 2011 15:13:15 +0000] DEBUG: Sending HTTP Request
>> >> >>> >> > via
>> >> >>> >> > GET
>> >> >>> >> > to api.opscode.com:443/organizations/qik/search/node
>> >> >>> >> > /usr/lib/ruby/1.8/net/protocol.rb:135: [BUG] Segmentation
>> >> >>> >> > fault
>> >> >>> >> > ruby 1.8.7 (2011-06-30 patchlevel 352) [x86_64-linux]
>> >> >>> >> >
>> >> >>> >> > It happens after a day chef working. New binaries didn't
>> >> >>> >> > help=(.
>> >> >>> >> >
>> >> >>> >> > On 8 August 2011 22:25, James < "> > wrote:
>> >> >>> >> >> Titov,
>> >> >>> >> >> We use different build methods, but largely the same spec
>> >> >>> >> >> files,
>> >> >>> >> >> for
>> >> >>> >> >> all of
>> >> >>> >> >> the dependencies. Some of the versions of dependencies are
>> >> >>> >> >> different.
>> >> >>> >> >> The
>> >> >>> >> >> spec files for the rubygems are going to be different as
>> >> >>> >> >> well.
>> >> >>> >> >> Sergio
>> >> >>> >> >> uses
>> >> >>> >> >> gem2rpm whereas I use fpm.
>> >> >>> >> >> These have so far only been tested on my own test systems, I
>> >> >>> >> >> would
>> >> >>> >> >> really
>> >> >>> >> >> appreciate other people testing them because I'll move them
>> >> >>> >> >> to
>> >> >>> >> >> the
>> >> >>> >> >> stable
>> >> >>> >> >> repo and start building out the rest of the Server
>> >> >>> >> >> dependencies,
>> >> >>> >> >> as
>> >> >>> >> >> well as
>> >> >>> >> >> builds for el6 and potentially FC.
>> >> >>> >> >> James
>> >> >>> >> >>
>> >> >>> >> >> On Mon, Aug 8, 2011 at 4:50 AM, Titov Alexander
>> >> >>> >> >> < "> >
>> >> >>> >> >> wrote:
>> >> >>> >> >>>
>> >> >>> >> >>> What is the difference between spec files for your ruby rpm
>> >> >>> >> >>> and
>> >> >>> >> >>> RBEL?
>> >> >>> >> >>> How long did you test this rpms for segfaults?
>> >> >>> >> >>>
>> >> >>> >> >>> On 6 August 2011 01:06, James < "> > wrote:
>> >> >>> >> >>> > All of the el5 i386 and x86_64 ruby, chef, and chef
>> >> >>> >> >>> > dependency
>> >> >>> >> >>> > packages
>> >> >>> >> >>> > have
>> >> >>> >> >>> > been rebuilt, along with dependencies for 0.10.4/5. These
>> >> >>> >> >>> > are
>> >> >>> >> >>> > currently
>> >> >>> >> >>> > in
>> >> >>> >> >>> > the testing.aegisco.com repo, and will be moved to the
>> >> >>> >> >>> > stable
>> >> >>> >> >>> > one
>> >> >>> >> >>> > after
>> >> >>> >> >>> > vetting.
>> >> >>> >> >>> > The rubygem-chef 0.10.5 package itself is held up on what
>> >> >>> >> >>> > I
>> >> >>> >> >>> > think is
>> >> >>> >> >>> > an
>> >> >>> >> >>> > incompatibility between rubygem's pessimistic version
>> >> >>> >> >>> > constraint
>> >> >>> >> >>> > [1]
>> >> >>> >> >>> > and
>> >> >>> >> >>> > rpm's lack of support for this feature. If someone can
>> >> >>> >> >>> > confirm
>> >> >>> >> >>> > this
>> >> >>> >> >>> > and
>> >> >>> >> >>> > write a translation layer for fpm, that would be
>> >> >>> >> >>> > wonderful.
>> >> >>> >> >>> > In
>> >> >>> >> >>> > the
>> >> >>> >> >>> > interim,
>> >> >>> >> >>> > I'll build these rpms by hand with modifications to the
>> >> >>> >> >>> > fpm-generated
>> >> >>> >> >>> > spec
>> >> >>> >> >>> > files.
>> >> >>> >> >>> > I have tested the i386 install for the segfaulting issues
>> >> >>> >> >>> > we
>> >> >>> >> >>> > were
>> >> >>> >> >>> > seeing
>> >> >>> >> >>> > previously, and they seem to be resolved. Further
>> >> >>> >> >>> > confirmation
>> >> >>> >> >>> > on
>> >> >>> >> >>> > this
>> >> >>> >> >>> > would
>> >> >>> >> >>> > be helpful as well.
>> >> >>> >> >>> > Example bootstrap:
>> >> >>> >> >>> > https://gist.github.com/1128513
>> >> >>> >> >>> > List of packages:
>> >> >>> >> >>> > autoconf-2.68-2
>> >> >>> >> >>> > flex-2.5.35-7
>> >> >>> >> >>> > gecode-3.5.0-1
>> >> >>> >> >>> > gecode-devel-3.5.0-1
>> >> >>> >> >>> > gecode-doc-3.5.0-1
>> >> >>> >> >>> > gecode-examples-3.5.0-1
>> >> >>> >> >>> > m4-1.4.16-2
>> >> >>> >> >>> > ruby-1.8.7.352-1
>> >> >>> >> >>> > ruby-devel-1.8.7.352-1
>> >> >>> >> >>> > ruby-irb-1.8.7.352-1
>> >> >>> >> >>> > ruby-libs-1.8.7.352-1
>> >> >>> >> >>> > ruby-rdoc-1.8.7.352-1
>> >> >>> >> >>> > ruby-ri-1.8.7.352-1
>> >> >>> >> >>> > ruby-static-1.8.7.352-1
>> >> >>> >> >>> > ruby-tcltk-1.8.7.352-1
>> >> >>> >> >>> > rubygem-bunny-0.7.1
>> >> >>> >> >>> > rubygem-bunny-0.7.4
>> >> >>> >> >>> > rubygem-chef-0.10.2
>> >> >>> >> >>> > rubygem-erubis-2.7.0
>> >> >>> >> >>> > rubygem-highline-1.6.2
>> >> >>> >> >>> > rubygem-json-1.5.2
>> >> >>> >> >>> > rubygem-json-1.5.3
>> >> >>> >> >>> > rubygem-mime-types-1.16
>> >> >>> >> >>> > rubygem-mixlib-authentication-1.1.4
>> >> >>> >> >>> > rubygem-mixlib-cli-1.2.0
>> >> >>> >> >>> > rubygem-mixlib-config-1.1.2
>> >> >>> >> >>> > rubygem-mixlib-log-1.3.0
>> >> >>> >> >>> > rubygem-moneta-0.6.0
>> >> >>> >> >>> > rubygem-net-ssh-2.1.4
>> >> >>> >> >>> > rubygem-net-ssh-gateway-1.1.0
>> >> >>> >> >>> > rubygem-net-ssh-multi-1.0.1
>> >> >>> >> >>> > rubygem-net-ssh-multi-1.1
>> >> >>> >> >>> > rubygem-ohai-0.6.4
>> >> >>> >> >>> > rubygem-polyglot-0.3.1
>> >> >>> >> >>> > rubygem-polyglot-0.3.2
>> >> >>> >> >>> > rubygem-rest-client-1.6.3
>> >> >>> >> >>> > rubygem-systemu-2.2.0
>> >> >>> >> >>> > rubygem-treetop-1.4.10
>> >> >>> >> >>> > rubygem-treetop-1.4.9
>> >> >>> >> >>> > rubygem-uuidtools-2.1.2
>> >> >>> >> >>> > rubygem-yajl-ruby-0.8.2
>> >> >>> >> >>> > rubygems-1.8.5-1
>> >> >>> >> >>> > [1] http://docs.rubygems.org/read/chapter/16
>> >> >>> >> >>>
>> >> >>> >> >>>
>> >> >>> >> >>>
>> >> >>> >> >>> --
>> >> >>> >> >>> Titov Alexander
>> >> >>> >> >>
>> >> >>> >> >>
>> >> >>> >> >
>> >> >>> >> >
>> >> >>> >> >
>> >> >>> >> > --
>> >> >>> >> > Titov Alexander
>> >> >>> >
>> >> >>> >
>> >> >>
>> >> >
>> >> >
>> >>
>> >>
>> >>
>> >> --
>> >> С уважением,
>> >> Титов Александр
>> >
>> >
>>
>>
>>
>> --
>> С уважением,
>> Титов Александр
>
>
С уважением,
Титов Александр
Archive powered by MHonArc 2.6.16.